Water heating radiator in the winter, most afraid of not using the frozen water heating radiator, radiator for General Plumbing after being frozen, will be 100 percent will be frozen, so water heating radiator has been frozen, how to do?Let's take a look at it.
How do the frozen water heating radiator
1 with hot water to thaw
Hot water thawing methodsWater heating radiatorPipeline tapping sound to determine the frozen position, and then use hot boiling water poured repeatedly, through the method of forcing frozen position ice melt.
2 will be frozen and thawed down radiator<
If the heatsink is frozen area is too large, just pour the way is not feasible, you can find the installation master will be frozen and then put down the whole radiator assembly, warm indoor or stove to thaw.This method of attention problems Water Leakage disassembly, and protect the interface.
3 large area icing pipeline pipeline needs to be changed
If the thaw pipe in large area, then only the replacement of the pipeline.In order to prevent other pipeline have been frozen, not to use this method.In order to avoid pipeline large area icing condition, the user needs to do a better job of prevention in advance, increase the insulation layer in the pipeline, heating pipeline make timely continuous hot water flow.
4 with warm air blower to defrost water heating radiator
After the frozen water heating radiator, heater and open water heating radiator for a long time to make the first heat radiator Plumbing blowing outside, and then slowly into the heat, so that the water heating radiator to achieve defrost.
The maintenance of water heating radiator
A water heating radiator, to fill the water maintenance.The radiator material is mostly made of steel, copper and aluminum composite, Aluminum Alloy, pure steel that this material can be several, oxidation corrosion, water heating radiator with water pipes to avoid air oxidation.
Two, don't put something on the water heating radiator.Don't put anything or in front of the radiator, the radiator and the room to maintain a certain distance from the plumbing in the room in the object, can ensure the heat radiator heating room, better effect.
Three, plumbing and heating pipe valve can not arbitrarily switch.The first operation of heating system are needed to debug, a lot of water heating radiator in debugging after the valve is fixed, not free to switch.
Four, water heating radiator can not arbitrarily change the position.Generally installed in the radiator for indoor heating, can ensure relatively uniform air flow and room temperature place, a change may cause the indoor temperature is not uniform, and the radiator and pipe leaks, bring home the big trouble.
Five, can not be free to drain from the system.Hot water heating radiator in the pipe network in the loss of more, the temperature falls faster, causing indoor temperature drop.Lack of water will use cold water, to maintain a certain pressure, so the heating will be very slow, not only affects the heating effect, and influence the service life of the radiator.
Six, cleanWater heating radiator.The radiator used for a long time will inevitably have the dust on top of the radiator, when cleaning to choose not heating, do not remove the radiator, wipe with a clean cloth, good cleaning can be used a little soapy water, then wipe clean, can not use a strong corrosive solution, but also to avoid the sharp goods scratch, so as not to damage the surface.
Seven, the user at any time to check the various joints.Water heating radiator used for a long time will lead to Water Leakage oxidation corrosion phenomenon, perhaps due to thermal expansion and contraction, joint loosening caused Water Leakage, there is unqualified material to Water Leakage as Water Leakage, please ask the maintenance staff or customer service personnel to control.
The above is the " frozen water heating radiator to do ".I hope you can help.